Cream Ointment Laboratory Vacuum Emulsifying Mixer Machine

Cream Ointment Laboratory Vacuum Emulsifying Mixer Machine

Product Ointment CZPT Vacuum Emulsifying Mixer
 

The basal gear of machine and specialized parameters
emulsify mixer mixer:
Working quantity: 10L, substance: SUS316L stainless steel, electricity heating and h2o-cooling
Structure: With three-layer construction, higher and decrease finish sockets. The higher finish socket is connected to the tank human body with flange between them. The interior layer of tank entire body is created of four mm thick SUS316L stainless metal and interior polished in 300 MESH (sanitary level). The center layer of tank human body is made of three mm thick SUS304 stainless steel and can stand max. working force .09MPa. The exterior layer of tank entire body is created of two mm thick SUS304, and exterior polished in 300 MESH (sanitary level). All the welding seams shall be polished after rubdown, and as to the treatment interface, turned more than edge arc changeover is adopted. The warmth preservation layer is manufactured of PU polyurethane foaming.
In the tank, there are 2 mixers:
3.11 Chopping and vortex emulsify mixer: 1.5kw, -2800 rpm (frequency manage)
three.12 Reduced-speed frame variety scraping mixer: .37kw, -forty rpm (frequency manage)
three.thirteen Attached units of the tank: Liquid feed inlet with stainless steel pipe filter, additive inlet, vacuum inlet, compressed air inlet, breaking vacuum inlet, sight glass, temperature sensor, CIP cleansing head, dustproof asepsis respiratory system.
3.two Pretreatment boiler:
one. Volume: oil boiler of 5L and water boiler of 5L one particular every single, content: SUS316L.
2. Composition: open up (fifty percent-open) type, with mixing.
In depth CZPT requirements:
Successful volumes: oil boiler of 5L, h2o boiler of 5L, materials: SUS316L, 3 layers framework. The content of the internal of tank physique is produced of 4mm thick SUS316L and inside polished in 300MESH (sanitary stage). The middle of the tank human body is created of three mm thick SUS304 and can stand max doing work force .09MPa. The exterior layer of tank human body is produced of two mm thick SUS304 and exterior polished in 300MESH (sanitary degree). All the welding seams shall be polished following rubdown, and as to the remedy interface, turned above edge arc transition is adopted. The heat preservation layer is created of PU polyurethane foaming. In the tank, there is a turbine mixer, .12kw reducer and -1400 rpm inlet rotary pace. Discharge hole is geared up with butterfly valve of sanitary stage and pipeline.
3.three Vacuum system 
one)      Adopting vacuum pump, motor energy: 90w 220 V.
two)      Adopting diaphragm type vacuum gauge, the technique vacuity keeps at-.93 MPa.  
three)      Adopting 316 L pneumatic butterfly valve to be interlocked with the motor.
3.4 CZPTtric handle system 
Substantial-pace mixing change, environment of velocity and temperature of major tank, heating switch of major and auxiliary tanks, setting of higher and reduce temperature boundaries of auxiliary tank, mixing switch and velocity handle of auxiliary tank, handle switch of reduced-velocity mixing and vacuum pump, and so on. shall be actuated and shown on the control panel. The machine applies minimal voltage electric powered appliances from Siemens, home-made higher-top quality sensor, frequency converter from Delta Corp. All are handbook valves and set up in yoke or thread varieties. 
four. CZPT Parameters of complete machine 
four.1   The entire volume of container:12L
4.two   Service quantity of container: 10L
4.three   Min. output:5L
4.four   Common dimensions:1100 mm x600 mm x 1500mm 
4.5   Web fat: 420 kg(only for CZPT products)
4.six   Container: connected with vertical and protruding flange with major edge, equipped with double jackets.
four.7   Heating by electricity. 
CZPT: by permitting cold water into the double jacket.
four.8   Services modes of container: environment / vacuum
4.9   Base of container: welded and high-grade mirror polish.
4.ten   Upper include: flanged and liftable.
four.eleven   The speed of gradual-pace mixing technique: -forty rpm, .37kw (frequency control).
four.twelve  The speed of large-speed homogenizing-mixing system: -2800 rpm, 1.5kw (frequency control)
four.thirteen   Set up electricity of vacuum pump: 90w
4.14   functioning pressure of container jacket: .09pa 
4.15   Major installation energy: 8kw 
four.sixteen   CZPTtric power: 220 V, fifty Hz. 
4.seventeen   Allowable fluctuation of voltage: ±5%.
four.18   CZPT: basic
4.19   Adjustable height of device frame: ±30mm
four.twenty    The air suction device for ventilating motor
4.21    CZPT is created according to GMP CZPT.
4.22   The machine physique is fully created of stainless metal SUS304.
four.23   All parts contacted with materials are manufactured of stainless steel SUS316L and mirror-polished. 
 

TECHNICAL SPECIFICATIONS

Model 

Manufacturing facility offering MZH-30L solar display Vacuum emulsifying mixer

Main Boiler 

10L  (Design volume 12.5L)

Main Boiler Jacket Material & Thickness

Within:316L(3mm)  Mid:304(3mm) Outside:304(2mm)

Blender Material & Thickness

SUS316L(thickness : 6mm)

Platform Material & Thickness

304(thickness : 4mm)

Safety Guardrail Material & Thickness

304(thickness: 1.5mm round pipe)

Speed of Scraping Plate Blender

-63r/min  

Speed of Disperser

-3600 r/min  

Temperature of Emulsifying Pot

≤120 ºC     

Bidirectional Blender Motor

Scraper driven one.5KW  

Homogenizer Power

3KW

Operating way

Button management

Heating Pipe Power

30KW

Vacuum of sharing Pot

-.09Mpa

Pressure of Jacket

normal pressures

Depth pictures below

 II. CZPTry Major Areas

III. Our Factory

IV. The Principal Task

V. Soon after Sale Support
one. Guarantee time: One particular year confirmed for good quality, product complete existence provider any damage other than the mistaken operation throughout warranty. Period is fixed freely, But the travel and resort expenditures must
be rely on purchaser.
2. Commissioning services: The product’s installation and commissioning at the need facet, our engineers will not leave there till get your agreement.
3. Traning Providers: Our engineers will teach your staff in your factory or video clip to work it in the course of the interval of set up and commissioning, and they will not depart there until finally your personnel can work it correctly and generally.
four. Manintenance Companies: Any malfunction occurred, When you inquiry us, We will reply you within
24 hours.
5. The File: The manual specification, report of the content which employed to the products and other files video connected to GMP authentication data will be provided by us.
 
VI. FAQ
one. Q: Are you factory or buying and selling company?
    A: We are the specialist manufacture of cosmetic equipment in China much more than 10years.
two. Q: Where is your location?
    A: Business and Showroom positioned in HangZhou china, Manufacturing facility found in CZPTsu and ZheJiang
          CZPT.
3. Q: Are your engineer be capable to serve in oversea?
    A: Of course, we have a great deal of encounter set up the machine in oversea.
four. Q: What is your content of your merchandise?
    A: adopt with complete stainless metal 304-2b and 316L
5. Q: How does your manufacturing facility do concerning quality manage?
    A: Two many years spare components,and total-lifestyle support of our machinery.

Our Company to buyer satisfaction for the growth of three ambitions: Product quality, Product technology and After-product sales provider.

Cream Ointment Laboratory Vacuum Emulsifying Mixer Machine