Pharmaceutical Ethanol Solvent Extractor Centrifuge for Hemp Cbd Oil

Pharmaceutical Ethanol Solvent Extractor Centrifuge for Hemp Cbd Oil

CZPT ethanol solvent centrifugal extractor for hemp CBD oil

The LCE Series centrifuges emphasis on extracting the marijuana and other plant species you need to have. Substantial-purity extraction of distinct vegetation is efficiently done by a programmable contact handle plan.

The LCE Collection Centrifuge is an all-in-one particular system that combines closed reduced temperature alcohol extraction with mechanical centrifugation. With PLC controller and Liquid crystal display contact screen, with forward/reverse/dehydration capabilities and the ability to established the time and variety of cycles, all of which can be programmed according to genuine use for much more productive separation. The system’s one-cycle operate time is roughly ten-15 minutes, making sure high good quality raw extracts in a quick time period of time.


  1. 98% plant extraction charge
  2. ninety seven% liquor removal charge
  3. The element in make contact with with the materials made of SUS304 or SUS316L, and the surface is dealt with with sanitary grade and no useless angle, straightforward to clean.
  4. The inlet port and outlet port adopt a hygienic swift clamp with a valve.
  5. All seals are sealed with PTFE or fluorine rubber, and the principal shaft is double-layer fluorine seal h2o seal/oil seal.
  6. Explosion evidence motor with 220V 3phase (220V solitary-stage is optional), PLC and contact display screen control, frequency conversion control cabinet.
  7. Equipped with two inlet/intake tubes, 1 vacuum port with valve, one drain port, inlet and outlet port for recirculating chiller.
  8. The cylinder is jacketed kind, can join with recirculating chiller for cooling.
  9. The foundation is equipped with 4 lifting rings for easy loading and unloading.
  10. Outfitted with 10m cable and handle cable, can use it immediately after electrical link.

Extraction cycle:

The LCE sequence centrifuge extractor with three plan cycles: spray wash, stirred clean and spin dry cycle. Each and every system cycle can be run immediately or manually. The operator masses the floor plant material into a filter bag and spots it in a centrifuge, rotating it at diverse speeds in the method whilst injecting alcohol at a managed fee. The centrifuge can also be submerged and stirred in each directions to entirely extract the plant content. Right after washing, the plant content is subjected to substantial-velocity spin-drying to take away 97% of the residue on the plant substance, and the active ingredient extraction charge is as higher as 98%. The liquor clean can be recycled two-three instances or straight for further processing.

one) System loading
Spot the filter bag filled with plants into the drum and seal the technique.
2) Cleansing cycle
Choose the velocity and time of ahead and reverse rotation in the software menu to perform the spray washing operation.
3) Alcoholic beverages filling
A pneumatic pump is utilized to pass the minimal temperature ethanol through the inlet pipe into the method.
4) Extraction commences
The plant substance in the centrifuge is stirred and washed, and a specific quantity of two-phase agitation cycles are established, so that 98% of the plant energetic component can be extracted.
five) Drain Technique
Right after the cleansing cycle is comprehensive, open up the outlet valve venting technique. The alcoholic beverages wash is pneumatically pumped to a appropriate reservoir for further processing.
6) High speed dehydration
Choose the “Dehydration” system on the system menu to start off the large velocity dehydration cycle. Completely dry the alcohol answer on the damp plant surface.


Design LCE-15 LCE-25 LCE-45 LCE-sixty five LCE-115 LCE-145 LCE-250
Capacity (L) fifteen twenty five 45 sixty five 115 145 250
Drum diameter
three hundred 300 450 450 600 600 800
Drum peak
250 350 three hundred 400 four hundred five hundred five hundred
CZPT velocity
2000 2000 1500 1500 1250 1250 1100
Motor energy
(Kw) 1.5 2.2 three four 5.5 eleven
1100*650*1571 1100*650*1571 1400*850*1080 1400*850*1080 1600*1060*1250 1600*1060*1330 1700*1400*1600
240 260 450 470 1000 1030 1350
Motor Explosion evidence motor
Management PLC controller, Lcd contact screen


Pharmaceutical Ethanol Solvent Extractor Centrifuge for Hemp Cbd Oil